RM48.80
Proton Saga Iswara Aeroback 1992 - 2003 Rear Left & Right Side Taillight Reverse Lamp Tail Lamp
Price RM48.80
Product SKU RL-24336-07-A
Brand OEM
Size (L x W x H) 60 cm x 35 cm x 30 cm
Availability Out Of Stock
Description
Highlight
  • Complete Plug & Play Socket Harness With No Wire Cut To Protect Manufacturer Warranty
  • Good Quality
  • Only For Proton Saga Iswara Aeroback 1992 - 2003 
  • Oem Replacement REVERSE LAMP
  • You May search our product for another side or select 1 Pair for Left & Right Side (1pair)
ITEMS: Proton Saga Iswara Aeroback 1992 - 2003  Reverse Lamp
SUITABLE FOR: Proton Saga Iswara Aeroback 1992 - 2003 
POSITION: REPLACEMENT REVERSE LAMP
CONDITION: BRANDS OEM
ITEM CODE: RL-PISW
COMES WITH: 1 PC REAR Lamp (LEFT / RIGHT SIDE) OR 1PAIR

PRODUCTS DECRIPTIONS:

  • Complete Plug & Play Socket Harness With No Wire Cut To Protect Manufacturer Warranty
  • Good Quality
  • Only For Proton Saga Iswara Aeroback 1992 - 2003 
  • Oem Replacement REVERSE LAMP
  • You May search our product for another side or select 1 Pair for Left & Right Side (1pair)

 

PRODUCT DETAILS:

 

INSTALLATION:

  1. Remove factory tail lights assembly. The tail lights for most cars are simply bolted on from the inside of the trunk. You just need to remove the trunk carpet cover and un-bolts the tail lights. Slowly move the loosed tail lights a little by a little to have the tail lights removed completely. Do not hurry on this step, because you might break any clips that are used to hold the tail lights from inside.
  2. Remove all the light bulbs from the factory tail light housing and disconnect any wiring harness connected to the tail light assembly as well. I will recommend you use the scotch blue tape to write down the turn signal lights, brake lights, backup lights and put on each set of wires so later when you put them back, you won't get confused.
  3.  Take your LED tail lights out from the box and try to put the tail lights back up just to make sure this is the correct part/side before you put all the bulbs back in.
  4. Connect the aftermarket LED tail lights with the factory wirings. For most LED tail lights, most of the sockets and plugs are already designed to be simply plug and play. However if there are any hard wiring required. Simply connect the stock red wire to the LED tail light red wire, and black wire to black.
  5. Before have the LED tail light completely bolt-on back, test it first. Test the brake light, test the turn signal light and test the backup lights to make sure everything works. If unfortunately one of them does not work, inspect the connection, because this is the most common reason for a lamp not lighting up.
  6. Place the LED tail lights back into the original tail lights locations. Use the blue tape to hold the tail lights if you are doing this by yourself or have your buddy hold it for you so you can bolt it back. Don't bolt the screw completely tighten in, because you want the tail light to completely back to the proper position, then tighten every screws.
Reviews (0)
view all
back
0
0 reviews
What's in the box
  • 1 x Reverse Lamp (Left / Right / 1Pair)
Tags: TailLamp