PRODUCT DESCRIPTION:
This turn signal lever is a new, aftermarket replacement part. It is designed to REPLACE original units that are prone for failure. It's just what you need to get your vehicle in good working order again!
PRODUCT FEATURES:
- Controls the following functions:
- Turn Signal
- High Beam
- Fog Lamp Switch
- Black finish on handle
- Exact replacement
- Built to strict quality control standards
- Does NOT fit models WITHOUT Fog Lamp feature
REMARKS:
Our electrical and electronic parts are subject to strict quality control testing . Once the item has been installed or plugged in, it is no longer eligible for a refund. The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed.
INSTALLATION:
- Open the hood for access to the battery. Disconnect the battery's positive and negative terminals.
- Remove the steering wheel shroud assembly.
- Twist the turn signal lever forward and pull it out. Put it in a safe place for later installation.
- Disconnect the wiring harness from the back of the switch. Unscrew the two screws holding the switch in place. The multi-switch is ready to be removed.
- Screw the new switch to the steering column with a screwdriver.
- Plug the wiring harness into the switch.
- Attach the lever to the switch. Push the lever into the switch and twist toward the front of the vehicle.
- Cap the steering column with the shroud covers.
- Reconnect the battery by installing the battery terminals. Test the multi-switch by checking each function to ensure it is installed correctly.
PRODUCT DESCRIPTION:
This turn signal lever is a new, aftermarket replacement part. It is designed to REPLACE original units that are prone for failure. It's just what you need to get your vehicle in good working order again!
PRODUCT FEATURES:
- Controls the following functions:
- Turn Signal
- High Beam
- Fog Lamp Switch
- Black finish on handle
- Exact replacement
- Built to strict quality control standards
- Does NOT fit models WITHOUT Fog Lamp feature
REMARKS:
Our electrical and electronic parts are subject to strict quality control testing . Once the item has been installed or plugged in, it is no longer eligible for a refund. The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed.
INSTALLATION:
- Open the hood for access to the battery. Disconnect the battery's positive and negative terminals.
- Remove the steering wheel shroud assembly.
- Twist the turn signal lever forward and pull it out. Put it in a safe place for later installation.
- Disconnect the wiring harness from the back of the switch. Unscrew the two screws holding the switch in place. The multi-switch is ready to be removed.
- Screw the new switch to the steering column with a screwdriver.
- Plug the wiring harness into the switch.
- Attach the lever to the switch. Push the lever into the switch and twist toward the front of the vehicle.
- Cap the steering column with the shroud covers.
- Reconnect the battery by installing the battery terminals. Test the multi-switch by checking each function to ensure it is installed correctly.
